东莞总公司

深圳公司

中山公司

广州公司
  • 网络分析仪
  • 频谱分析仪
  • 信号源
  • 无线电综合测试仪
  • 示波器
  • RF功率计
  • 音频分析仪
  • 视频分析仪
  • LCR分析仪
  • 噪声系数分析仪
  • 手机测试仪器
  • 动态信号分析仪
  • 调制度分析仪
  • 逻辑分析仪
  • 数字万用表
  • 频率计
  • 函数信号发生器
  • 电子负载
  • 直流电源
  • 数字功率表
  • 首页 >>> 产品目录 >>> 频谱分析仪
    产品[!!!新到货!MS8604A 特价销售!<东莞银通仪器欧阳小兵:13332662998>]资料
    如果您对该产品感兴趣的话,可以
    产品名称: !!!新到货!MS8604A 特价销售!<东莞银通仪器欧阳小兵:13332662998>
    产品型号: MS8604A
    产品展商: 东莞市飞宇电子有限公司
    简单介绍
    频谱分析仪:MS8604A 9K-8.5GHA
    !!!新到货!MS8604A 特价销售!<东莞银通仪器欧阳小兵:13332662998>的详细介绍

    银通/奥斯达电子仪器有限公司 总公司

    联络人:欧阳小兵老板 13332662998  0769-87108906

    E-MAIL:tosstar@163.com  QQ:152623914

    特点
    ·100Hz~8.5GHz
    ·由单一系统评估主发射机功能
    ·与NADC,PDC,PHS,数字MCA, GSM, DCS1800(PCN), CT2, DECT,WCPE,PACS,RCR STD-39 TETRA系统及GMSK和π/4 DQPSK通用测量软件相兼容;
    ·高速测量(调制精度测量小于1s)
    ·输入共10W(内部有用于高功率测量的20dB衰减器及功率计
    技术指标
    General Frequency
    range
    100Hz to 8.5GHz
    Maz.input
    level
    (continuous
    wave
    average
    power)
    +40dBm(10W)
    Reference oscillator Frequency:10MHz
    Starting characteristics:≤5×0.00000001/day(option:≤2×0.00000001/day after30 min.warm-up)
    *After 10min.of warm-up,compared to the frequency after 24-hour warm-up
    Aging rate:≤2×0.00000001/day(option:≤5×0.000000001/year)
    *Compared to the frequency after 24-hour warm-up
    Temperature characteristics:5×0.00000001/day(option:3×0.00000001/day)
    *0to 50℃,relative to the frequency at 25℃
    Spectrum
    anallyzer
    Frequency

    Setting range:100Hz to 8.5GHz(resolution:1Hz),0to 2GHz(freq.band:0),1.7to7.5GHz(freq.band:1-),6.5to 8.5GHz(freq.band:1+)
    Preselector range:1.7to 8.5GHz (bands:1-/1+)
    Display accuracy:±(display freq.×reference freq.accuracy+span×span accuracy)
    Span
    Setting range:0Hz,100Hz to 8.5GHz
    Accuracy: ±2.5%(span≥1kHz),±5%(100Hz≤span<1kHz)
    RBW
    Setting range:10Hz to 3MHz(3dB),1-3serqence
    Accuracy:±20%
    Selectivity(60/3dB);≤15:1(100kHz to 3MHz),≤12:1(10Hz to 30kHz)
    VBW:1Hz to 3MHz,off,1-3 seqrence
    Signal purity(SSB,1MHz to 4GHz):
    ≤-100dBc/Hz(10kHz offset,≤-115dBc/Hz(50kHz offset),≤-120dBc/Hz(100kHzoffset)

    Spec-
    trum analyzer
    Ampl-
    itude
    Level Level measuring range:Average:Average noiselevl to +40dBm
    Average noise level:≤-112dBm(10MHz to 8.5Ghz,RBW 10Hz,VBW 1Hz,input att.setting20dB)
    Residual reponse:≤-75dBm(1MHz to 8.5GHz,input att.setting 20dB)
    Reference
    level
    Setting range:-80to +40dBm
    Accuracy:±0.5dB(-30to +20dBm),±0.75dB(-40to -30dBm,+20to +40dBm),±1.5dB(-60to-40dBm)
    *After calibration and at freq.100Mhz,span≤2MHz,and in auto mode for inputatt ,RBW,VBW and sweep time settings
    RBW switching error(after calibration):±0.3dB(RBW:≤300kHz),
    Frequency reponse ±0.5dB(100MHz to 2GHz,band:0),±1dB(1.7to8.5GHz,bands:1-/1+)
    Linearity(
    after calibration)
    LOG:±0.3dB(0to -20dB,RBW:≤100kHz),±1.5dB(0to-80dB,RBW≤10kHz)
    LIN:±5%(to reference level)
    Dynamic
    range
    2nd harmonics:
    ≤-70dBc(5to 800MHz,band:0,mixer input level:-30dBm)
    ≤-80dBc(800to 850MHz,band:0,mixer input level:-30dBm),
    ≤-90dBc(850MHz to 2.1GHz,bands:1-,mixer input level:-10dBm)
    Two-signal third-ouder intermodulation distortion:≤-70dBc(10to 50MHz),≤-85dBc(50MHzto 2.1GHz)
    *Frequency difference between two signals≥50kHz,mixer input level:-30dBm
    Sweep Sweep time
    Setting range:20ms to 1000s(TRACE-FREQ,data points:NORMAL),50ms to 1000s at other conditions
    Accuracy:±10%(20ms to 200s),±15%(200 to 1000s)
    Sweep mode:CONTINUOUS,SINGLE
    Trigger:FREE RUN,TRIGGERED
    Trigger source:VIDEO,LINE,EXT(±10V),EXT(TTL)
    Gate mode(OFF,random sweep mode)
    GATE DELAY:0to 65.5ms(in 1μs steps,GATE END:INT)
    GATE END:INT/EXT
    Time
    domain
    waveform
    display
    Sweep fime:50,100to 900μs(data point:NORMAL,Onemost significant digit can be set.)
    1ms to 1000s(data point:NORMAL,Two most significant digits can be set)
    100,200to800μs(data point:DOUBLE,One most significant digit can be set aseven number.)
    1ms to 1000s(data point:DOUBLE,Two most significant digits can be set aseven number.)
    Delay time
    Pre-trigger.-time span to 0s(in 1point steps)
    Post trgger:0to 65.5ms(in 1μssteps)
    Amplitude display resolution:50μsto 49ms,10bits*0.1%of full scale)
    50ms to 1000s,14bits(0.01%of full scale)
    Detection
    mode
    POS PEAK,SAMPLE,NEG PEAK
    Number
    of
    points
    NOUMAL:501 points,DOUBLE:1002points
    AM/FM
    demodu-
    lation
    Demodulated waveform display and monitoringdemodulated audio signal with internal speaker
        Auxiliary inputs/
    outputs
    IF output21.4MHz:-10dBm±2dB(at top of
    screen,with output terminated by 50Ωteminator),BNC connector
    Youtput:0to 0.5V±0.1V(at range between
    top and bottom of screen,LOG:10dB/div,LIN:10%/div,100MHz
    and with output terminated by 75Ω
    terminator),BNC connector
    External trgger input
    Input1:max.±10V(in 0.1V steps,
    rising/falling edges selectable
    and pulse width≥10μs),BNC connector
    Input2:TTL level(rising/falling
    edges selectable and pulse width≥10μs,
    )BNC connector
    Power meter Frequency range 100kHz to 5.5GHz
    Level range -20to +20dBm
    Instrumentation
    accuracy
    ±0.5%
    Zero set ±0.5% of full scale at most
    sensitive range(100μW range)
    Zero shift between
    ranges
    ±0.2% of full scale zero setting at mostsensitive range
    Calibration oscillator Freq:50MHz,Output:1.00mW,Accuracy:±1.2%
    Applicable power
    sensor
    MA4601A
    Others Display 640×400dot,9-inch EL
    Inputs/outputs on rear panel Reference input:10MHz±10Hz,2to 5Vp-p,
    ≥50Ω,BNC connector
    Reference buffer output:10MHz,2to
    3Vp-p(with the output terminated by
    200Ω terminator),BNC connector
    Separate video output:Compatible
    with 8-pin DIN connector
    External memory One slot for can be connected
    Save/recall Internal memory(4sets of spectrum
    and Tx test conditions),can
    save/recall setting conditions
    at extemal memory(PMC)
    Direct plotting Can hard-copy screen via GPIB2
    External control GPIB1
    (IEEE488.2)
    As device controlled by host,all
    functions except power swetch
    Controls other instruments as controller
    using PTA
    SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1,
    C0(C1,C2,C3,and C24with PTA)
    GPIB2
    (IEEE488.1)
    Controls other instruments as controller
    SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1
    ,C1,C2,C3,C4,C28
    I/O port Output port A/B:8-bit(TTL level),
    Input/Output port C/C:4-bit(TTL level),
    EXclusive port:3-bit(TTL level)
    Control signal:4(TTL level),+5V
    output:Max.50mA
    RS-232C
    (Option 02)
    Controls other instruments as
    controller
    PTA Language PTL:High level languaeg interpreter
    based on BASIC
    Programming Using external keyboard
    Program
    memory
    On PMC or FD
    Upload/download from/to PC
    Programming capacity 900KB
    Operating temperature 0°to 50℃
    Power 85to 132/170 to 250Vac,47.5 to 63Hz
    ,≤500VA
    Dimensions and mass 426(W)×221.5(H)×451(D)mm,≤27kg
    EMC*1 EN55011:1991,Group1,ClassA
    EN50082-1:1992
    Safety EN61010-1:1993(Installation CategoryII
    ,Pollution DegreeII)

    订货信息
    Applicable system
    Measurement software
    Application software(supplied by PMC)
    PDC
    Option11
    MX3512A
    PHS
    Option12
    NADC
    Option13
    Digital MCA
    Option14
    MX3513A
    GSM
    Option15
    MX3518A
    DC1800(PCN)
    DECt
    MX3519A
    CT2
    MX3520A
    General-purpose GMSK
    -
    WCPE
    Option16
    -
    RCR STD-39
    PACS
    TETRA
    General-purposeπ/4 DQPSK

    本公司长期现金收购:音频仪器,视频仪器,高频仪器(网络分析仪,频谱分析仪高频信号源,无线电综合测试仪等高频仪器,并高频承接仪器维修)!



    产品留言


    相关产品
    Advantest TR4173 频谱分析仪.爱德万.银通 TR4173
    Advantest 爱德万 TR4172 频谱分析仪.银通 TR4172
    Advantest TR4171 频谱分析仪.爱德万.银通 TR4171
    LG SA-7270A 频谱分析仪 SA7270A .银通 SA-7270A
    LG SA-7270 频谱分析仪 SA7270.银通 SA-7270
    东莞市飞宇电子有限公司   电话:0769-87912629 87881840 13688968946  传真:0769-87912842
    地址:广东省东莞市塘厦镇     邮编:523710   粤ICP备09097360号   网站管理入口
     
    主营产品:网络分析仪  频谱分析仪  音频分析仪